Back to Recent Q&A >
Archive Bookmark

[j-nsp] Stuck access-internal route

Hi list,

I've come across a situation on an MX where an access-internal route
is "stuck". I was hoping someone had an idea on how to clear it - my
best bet so far is rebooting. I've tried clearing dhcp relay binding,
but that's not possible as the entry is already out of the DB.

Here's the problem:
me@MX> show route xxx.yyy.209.53

inet.0: 346617 destinations, 346630 routes (346609 active, 0 holddown, 8 hidden)
+ = Active Route, - = Last Active, * = Both

xxx.yyy.209.53/32 *[Access-internal/12] 5d 19:55:08
> to #0 0.19.cb.53.37.c6 via ge-0/0/3.1721

me@MX> show interfaces ge-0/0/3.1721
error: interface ge-0/0/3.1721 not found

The problem started when I moved some 5700 customers from this box to
a new one - some of the customers are stuck in this state. Meaning
that customers left on MX1, can't reach those moved to MX2.

Running 10.0R2.10 on the box with this issue, and on DPCE-R.

Cheers, Bjørn

_______________________________________________
juniper-nsp mailing list juniper-...@puck.nether.net
https://puck.nether.net/mailman/listinfo/junipe...

Type: Q&A - Source: puck.nether.net - Sent by Bjørn Skovlund - September 09, 2010 08:26:33
Tags: route running interface dhcp idea relay

View Replies

>Sthaug : That's going to be lower impact than restarting the whole box - but...

Sent by Sthaug - September 09, 2010 08:39:27

>Bjørn Skovlund : I'm still waiting on a servicewindow to solve the overall situation.

Sent by Bjørn Skovlund - September 10, 2010 09:25:38